Electronics is everywhere, especially these days. Many times, as frequent users, we do not even notice a “paradigm change” in the things we use on regular basis. We use a fridge, but we do not care ...

The Serial Peripheral Interface (SPI) interface was initially standardized by Motorola in 1979 for short-distance communication in embedded systems. In its most common four-wire configuration, ...

The 23LCV1024 is a 1 Mbit Serial Peripheral Interface (SPI) serial SRAM with battery backup and SDI interface. The memory of the device is accessed via a simple SPI compatible serial bus. The bus ...

The MAX3420E contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral compliant to USB specification rev 2.0. A built-in full-speed transceiver features ±15kV ...

More often than not, an IoT master device uses the SPI (serial peripheral interface) and I 2 C (inter-integrated circuit) protocols to exchange data with EEPROMs or sensors that are operating in slave ...

The serial peripheral interface (SPI) bus is a synchronous, full-duplex, serial data link commonly used for the short-distance data exchange between a master device, such as a microcontroller unit ...

In the last video I demonstrated a Universal Active Filter that I could adjust with a dual-gang potentiometer, here I replace the potentiometer with a processor controlled solid-state potentiometer.

Bytom, Poland -- June 28, 2022 --DCD-SEMI, a leading IP Core provider and SoC design house from Poland has mastered unique DeSPI IP Core. It is a fully configurable eSPI master/slave device supporting ...

When looking at protocol information on a bus, an oscilloscope may not be the first instrument to come to mind�until now. As most engineers know, digital oscilloscopes are an indispensable ...

Digital Core Design, the Poland-based IP core design house, has developed the DSPI_FIFO, a fully configurable SPI master/slave device, which allows the SoC designer to configure polarity and phase of ...